Month: December 2018

SATA HDD & SSD shown as removable

Posted on by phong

https://www.tenforums.com/drivers-hardware/103068-sata-hdd-ssd-shown-removable.html#post1277271 Bios does not have Hot Swap options for SATA drives.Interface is AHCI.Have tried: ” reg.exe add “HKLM\SYSTEM\CurrentControlSet\Services\storahci\Parameters\Device” /f /v TreatAsInternalPort /t REG_MULTI_SZ /d x”Which corrects for one drive but when run on the second drive the first drive reverts to removable.I doubt very much that this is a driver issue; it’s just a typical […]

Proxmox storage tips/HDD pass through

Posted on by phong

Check/list hdd hw ls /dev/disk/by-id/ lsblk Check MD raid status cat /proc/mdstat Remove a hdd from software raid md0 mdadm –fail /dev/md0 /dev/sdx1mdadm –remove /dev/md0 /dev/sdx1 mdadm –remove /dev/md0 /dev/sdx2 udevadm info –query=all –name=/dev/sdx | grep ID_SERIAL zfs list zpool status zfstorage Remove a hdd from zpool zpool detach zfstorage /dev/disk/by-id/…. zpool status zfstorage clear […]

Adding a second HDD to Proxmox

Posted on by phong

https://forum.level1techs.com/t/adding-a-second-hdd-to-proxmox/116019 This really is an odd failing that has been around since Proxmox moved to their new interface. So here are three ways you can do this, all of which involve ssh’ing into your Proxmox box. Assuming /dev/sdb is your new disk. If you want to use LVM.ssh into your Proxmox box and do, pvcreate […]